EPS Styrofoam Insulation (Jacketing) Materials

Contents;

1. Roof waterproofing materials Prices
2. Insulation  materials
3. Heat Insulation Board Prices
4. Thermal Insulation Materials Foam Prices
5. Insulation Material Styrofoam Prices
6. Exterior Heat Insulation Materials m2 Unit Prices  
7. Roof Insulation materials
8. Exterior Wall Cladding Material Suppliers

In order for the insulation to be successful and to remain intact for a long time, thesheathing materials used during the application are of great importance. The sheathing process can only be permanent with the right material selection and canmeet other goals, especially thermal insulation. In the correct selection of the insulation materials tobe used in the buildings, the characteristics of the building, the purpose of use and the climatic conditions are of great importance.

Insulation, with its shortest definition, is the process of covering the outer surface of a building with materials with thermal insulation properties. Nowadays, sheathing (insulationwhich has become an indispensable program for every newly built structure, can be easily applied to old buildings if desired.

What are Insulation Supplies?

Exterior jacketing refers to the procedure created with the aim of providing thermal insulation in buildings. On this sideit can also be called as a procedure that performs thermal insulation for insulation purposes. Heat insulation, on the other hand, can be explained as the whole of the procedures created to eliminate the temperature difference in the environment. Detailed materials are used to reduce heat transfer during the jacketing application. At this point, we can state that detailed jamb coating materials are usedduring jacketing, which is one of the thermal insulation proceduresThese materials are called insulation materials. Alright,What are the insulation materials that we can use while insulating using insulation materials?

Best Exterior Wall Cladding Material Suppliers

Although there are many materials that can be used in the isolation procedure, certain standards have emerged in the construction market over time. The most widely used and recommended insulation materials should have certain properties.

1. The heat transfer coefficient should be as low as possible.
2. It should be minimally affected by water, rain and humidity.
3. It should be non-flammable.
4. It has to be light.
5. Dimensionally stable; In seasonal transition periods, depending on the temperature differences, the ratio of width and height should remain constant.
6. It should be strong and flexible enough to withstand all kinds of harsh conditions.
7. It should be odorless and free of parasites, pests, etc.
8. Affordable price; No matter how high quality an insulation material is, if it cannot be offered for sale at an affordable price , it is not preferred by consumers.
9. It should be long-lasting and easy to process.

Best Insulation (Jacketing) Supplies

Thermal insulation boards : It is one of the most frequently used materials in insulation programs and is divided into different classes according to its purpose.
EPS (Expanded Polystyrene) Sheets: EPS, the most economical and best insulation material currently known , is as light as possible and does not create an additional load on the part where it is applied. EPS, which is also known for its longevity, is a petroleum-derived material and can also be used as carbon-reinforced. The qualification standard valid for EPS purposes is TS EN 13163.
XPS (Extrude Polystyrene) Insulation Boards: Another petroleum-derived jacketing material XPS, as its name suggests, is produced by the extrusion procedure. XPS, which does not contain water and moisture, has a high compressive strength and a very low thermal conductivity numerical value. The qualification standard valid for XPS is TS EN 13164.
Rock Wool Insulation Material : The most important feature of rock wool material is that 95% of its volume (sometimes up to 99%) is formed by air spaces. Stone wool boards, which can easily get wet and lose all their properties when wet, can give successful results when applied correctly. The quality standard for stone wool is TS EN 13162. other auxiliary materials
used in insulation (exterior cladding) Among them, materials such as adhesive mortars, heat insulation plasters, exterior cladding plaster, reinforcement mesh and insulation dowel, corner and sub-basement profile can be counted.

Manufacturing of jamb models and  jamb on building facades  and as a final process, jamb assembly  is done by us as Metpor Jamb and Sheathing. The materials that we will use in the analysis of building decoration and villa jamb models are one step ahead with the advantage of being able to be produced in different models and sizes. Building jamb models provide a decorative view, especially thanks to the cornerstone  application, which has  been known as  building corner jamb models for centuries.